Esener lithium battery 51.2v 100ah 5.12kwh
Lead Time 2-3 Business days
Available online & in-store
Delivery estimated within 20/11 and 29/11
There are ESENER Lithium Battery 51.2v 100ah 5.12kwh
HIGHLIGHTS
- Esener 51.2V 100Ah LiFePo4 Single Battery Module
- Wall Mount Or Shelf Rack Installation With Brackets Included
- Complete with an integrated Battery Management System (BMS)
- Advanced BMS With Current Limiting Factor
- Parallel Connection Up To 15 Packs With Full Communication To A Total Of 72kwh
- Normal Voltage: 51.2V
- Rated Capacity (5HR):110Ah
- Total Usable 4.8 kWh
- Maximum Continuous Charging Current: 100A
- Maximum Continuous Discharging Current: 100A
- Equalised Charge Voltage: 58.4V
- Low Self-Discharge
- High Energy Density and Conversion Efficiency
- Built In Protection -Over-Charge, Over-Discharge, Over-Temperature
- LCD Control Panel
SPECIFICATIONS
- Stock Code SOLES51LB100A
- Description Solarix Esener 51.2V 100Ah LiFePo4 Single Battery Module
- Complete with an integrated Battery Management System
- Rated Capacity (5HR): 110Ah
- Voltage: 51.2V
- Discharge Cut-off Voltage: 40.0V
- Equalised Charge Voltage: 58.4V
- Maximum Continuous Charging Current: 100A
- Maximum Continuous Discharging Current: 100A
- Display: LCD
- Parallel: Parallel connection up to 15 packs with full communications
- Cells: New Li-Ion Prismatic Cells
- Design Life: -/+ 15 Years
- Cycle Life @ 1C: +/-4000 Cycles @ 100% DOD, Above 6000 cycles @ 80% DOD
- Ports: 1x CAN Bus, 1x RS-485 Battery Link ports, 2x Parallel Instruction Ports
- Protection: Electronic Circuit Breaker, BMS Voltage Protection, Current Limiting
- Dimensions (WxDxH): 505mm x 162mm x 543mm
- Weight: Approx. 46kg
- Includes Bracket
5 Years Warranty
Warranties:
All inverters and batteries must be installed by a qualified electrical wireman or Master electrician with a valid registration with the Department of Labour. A valid electrical certificate of compliance (COC) must be issued once installed, specific to the installation of the backup or solar system. The installation must be compliant with SANS 10142 and ALL its parts. Any warranty claim submitted without installation photos, a valid COC and proof of a qualified wireman/master electrician installing the unit, can be rejected and will render the warranty claim null at void.
